00
Hours
00
Minutes
00
Seconds
Get In Touch +1 (888) 851-3898
- Description
- Specifications
- manual
- Delivery
Description
The Yardbeast 3.5” is a heavy-duty chipper is powered by 429CC Kohler CH440 Engine, capable of delivering the torque needed. It counts with a centrifugal clutch that provides protection to the engine.
It’s offered in two versions: ATV towable or Hand Towable. The gooseneck discharger gives you the convenience that you need. The ATV tongue can be configured for trailer coupler and standard tongue hitch most commonly used on Garden tractors.
Features
- Pivotal Chipper Box – open the chipper box in half for a quick inspection of the blade and interior
- Gooseneck Discharge – deposit the branches in trash bins, pick-up beds and more
- ATV Tow Kit – Take your chipper directly to the job site
- The towable kit makes it a breeze to hook the beast onto the quad or ATV
- If storing it, the tow bar folds to save space
- Wide Chute Feed – wide enough to accommodate riddled branches with twigs and leaves
- 429CC Kohler CH440 engine
- Quad-clean cyclonic air cleaner
- Forged-steel crankshafts
- Stellite® -faced exhaust valves
- Tufftride-coated stems and cast-iron cylinder bores
- Torque output rated at 22.7ft-lbs
- Oil Sentry™ – automatically shuts engine down in low-oil conditions
- Centrifugal Clutch: commercial-grade clutch allow to efficiently pass on the torque generated from the engine
- Built for long hours of operation and virtually zero-maintenance
- Chips up to 3.5” true feed capacity
Specifications
| Chipping capacity | 3.5" |
|---|---|
| Rotor RPM | 3,000 |
| Rotor Weight | 56 lbs. |
| Blade | D2 Tool Steel Blade |
| Blade dimensions | 5.82" x 2.33" |
| Rotor Construction | 7/16" wafer front disc with 1/4" rotor vanes |
| Flywheel | 17.32" |
| Feed Hopper | 24" x 11" |
| Frame construction | 7-ga steel. Weld seams all around |
| Bearing units | SKF® roller sealed bearings /custom steel housing |
| Discharge height | 54.7" |
| Control | Discharge deflector |
| Chipper Weight (w/engine) | 320 lbs |
| Make | Kohler CH440 Command Pro® 14HP engine |
| RPM | 3,600 |
| Torque | 19.8ft-lb @ 2,400RPM |
| Dry Weight | 72.8 Lbs |
| Displacement | 429 cc |
| Oil Capacity | 1.4 quarts (1.3 Lts) |
| Fuel Capacity | 7.0 Lts |
| Emissions | CARB Tier III certified |
manual
Delivery
Order shipment preparation takes 3 days. Once shipped orders usually takes 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.