BendPak XPR-9S-LP 2-Post Car Lift, 9K Capacity, Floorplate, Chain, Shorty, Adjustable Width, Screw Pads, LOW-PRO ARMS - 5175391

Save 10%

Sale price$4,261.99 Regular price$4,734.99


You Don’t Last In This Industry Without Consistently Setting Yourself Above The Rest In The Way You Treat People. That’s Why We’re Always Willing To Go The Extra Mile—or Ten, Or Twenty—to Make A Customer Feel Satisfied They Chose Bendpak.

The safe and rugged XPR-9S-LP short-column two-post lift features our exclusive Low-Pro™ arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. You’ll appreciate the convenience of wide or narrow installation wrapped up into one configurable package. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership.

Every XPR-9S-LP two-post car lift comes with:

Telescoping Low-Pro™ arms.
The safe and rugged XPR-9S-LP two-post lift features our exclusive Low-Pro™ arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis.

Lowered arm tube supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our two-post lift arm tube supports to allow for better clearance.

Automatic arm restraints
Each lifting arm is equipped with durable lift arm restraints that automatically engage each time the lift is raised. When the two-post auto lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series Lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.

Single-piece columns
We specifically manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.

Wide or narrow selection
Wide or narrow car lift configurations are available, allowing you to maximize your floor space.

On the level
Our dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001” diametrically, ensuring superior cylinder operation and life. 

High-speed hydraulics
Free-flow, high-pressure 3/8” hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.

Detailed instructions
Included with every BendPak car and truck lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.   

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult for a complete list or contact BendPak via

  • 9,000-lb lifting capacity
  • Shorter column for low-ceiling installations
  • Telescoping Low-Pro™ arms accommodate lowered sports cars and those vehicles with lift points located on outer edges of the chassis
  • Adjust able wide or narrow drive-thru configurations
  • Extended rise gives you over 6-feet of under clearance
  • Single-piece columns
  • Single-point safety release
  • Chain lifting system combined with dual hydraulic cylinders
  • Electric / hydraulic power system
  • Large 20" x 19" steel base plates
  • Self-lubricating dura-glide polyethylene bearing system
  • Safety locks in each column spaced every 3-inches
  • Automatic arm restraints
  • Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
  • 4-piece 63 mm stackable adapter set comes standard



Lifting Capacity*

9,000 lbs. / 4082 kg

*Max Capacity / Front Axle

4,500 lbs. / 2041 kg

*Max Capacity / Rear Axle

4,500 lbs. / 2041 kg

A - Height Overall:

113" / 2,870 mm.

B - Width Overall: (NARROW)

132" / 3,353 mm.

B - Width Overall: (WIDE)

145" / 3,683 mm.

C - Width Outside of Columns: (NARROW)

126-3/4" / 3,225 mm.

C - Width Outside of Columns: (WIDE)

139-3/4" / 3,555 mm.

D - Floor Pan Height:

1-3/4" / 44 mm.

E - Inside Columns: (NARROW)

105" / 2,667 mm.

E - Inside Columns: (WIDE)

118" / 2,997 mm.

F - Reach (Front Arm Min.):

28-1/2" / 724 mm.

G - Reach (Front Arm Max.):

47-1/2" / 1,206 mm.

H - Reach (Rear Arm Min.):

28-1/2" / 724 mm

I - Reach (Rear Arm Max.):

47-1/2" / 1,206 mm.

J - Min. Pad Height:

4" / 102 mm.

K - Rise:

69" / 1,753 mm.

L - Max Lift Height (Pad Only):

73" - 75" / 1,854 - 1,905 mm.

M - Max Lift Height (3" Adapter):

75.5" - 77.5" / 1,917 mm. - 1,968 mm.

N - Drive-Thru Clearance: (NARROW)

93" / 2,362 mm.

N - Drive-Thru Clearance: (WIDE)

106" / 2,692 mm.

Screw Pad Adjustment:

2" / 51 mm.

Motor (**)

220 VAC / 60 Hz. 1Ph.

Time of full Rise:

45 Seconds

Max Load Per Arm:

2,250 Lbs. / 1,021 kg.


Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.

Recently viewed

You may also like