BendPak XPR-10AS-LP 2-Post Car Lift, 10K Capacity, Asymmetric Clearfloor, Adjustable Width, Screw Pads, LOW-PRO ARMS - 5175398

Save 10%

Sale price$4,346.99 Regular price$4,828.99


You Don’t Last In This Industry Without Consistently Setting Yourself Above The Rest In The Way You Treat People. That’s Why We’re Always Willing To Go The Extra Mile—or Ten, Or Twenty—to Make A Customer Feel Satisfied They Chose Bendpak.

Our XPR-10AS-LP asymmetric two-post lift features our exclusive Low-Pro™ arms that better accommodate lowered sports cars and vehicles with ground effects. This durable, safe, and reliable car lift features an expandable top beam for wide or narrow installation and Tru-Metric arms to suit virtually every vehicle lifting requirement. The simple, yet highly sophisticated lift design keeps service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity.

Every XPR-10AS-LP comes with:Direct-Drive two-post car lift technology

BendPak two-post lifts feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and less maintenance costs throughout the life of your lift. High-volume, low-pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred on commercial-grade two post car lifts as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurized hydraulic fluid flows from the power-unit, through the hollow cylinder rods then enters the cylinder body and fills the inside cavity. The pressure of the hydraulic fluid extends the piston rod downward raising the cylinder body and lift carriages. A dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Telescoping Low-Pro™ arms.
The safe and rugged XPR-10AS-LP two-post lift features our exclusive Low-Pro™ arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. 

30° Rotated Columns / Two lifts in one
The XPR-10AS-LP features rotated columns for added clearance when opening vehicle doors. At the same time, swing-away arms provide a larger drive-thru clearance.
 The exclusive Tru-Metric arm design to provide variable arm-position configurations—either symmetric or asymmetric, providing greater versatility for greater service capability. It's like two lifts in one.

Clearfloor convenience
Our clearfloor models provide unobstructed floor space allowing technicians to easily move toolboxes, transmission jacks, oil drains and other equipment underneath the elevated vehicle.

Optional column extension

Gives you the flexibility of increasing the overhead clearance to maximize the vehicles you can service.

Included truck and van adapters

Others might charge extra for these necessary adapters, but they're standard with every XPR-Series lift. Ideal for trucks and vans with running boards or auxiliary fuel tanks.

Lowered arm tube supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.

Automatic arm restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Taller lift carriages
Take a close look at our lift carriages (the lifting assembly that the arms are attached to) and then take a look at the competition. You'll notice our 53" tall carriages are considerably taller than most, which minimizes the stress placed on the load bearings and columns.

Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.


Industrial-grade hydraulic cylinders

Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.

High-speed hydraulics
Free-flow, high-pressure 3/8" hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.



    Lifting Capacity*

    10,000 Lbs. / 4,536 kg.

    *Max Capacity / Front Axle

    5,000 Lbs. / 2,268 kg.

    *Max Capacity / Rear Axle

    5,000 Lbs. / 2,268 kg.

    A - Height Overall:

    145" / 3,683 mm*

    B - Width Overall: (NARROW)

    137" / 3,480 mm .

    B - Width Overall: (WIDE)

    145" / 3,683 mm.

    C - Width Outside of Columns: (NARROW)

    133" / 3,378 mm.

    C - Width Outside of Columns: (WIDE)

    141" / 3,581 mm.

    D - Floor To Overhead Switch:

    141" / 3,581 mm.*

    E - Inside Columns: (NARROW)

    104" / 2,642 mm.

    E - Inside Columns: (WIDE)

    112" / 2,845 mm.

    F - Reach (Front Arm Min.):

    23-1/2" / 597 mm.

    G - Reach (Front Arm Max.):

    38-1/2" / 978 mm.

    H - Reach (Rear Arm Min.):

    34-1/2" / 876 mm.

    I - Reach (Rear Arm Max.):

    54-1/2" / 1,384 mm.

    J - Min. Pad Height:

    4.25" - 6-3/4” / 108 mm. - 171 mm.

    K - Rise:

    69" / 1,753 mm.

    L - Max Lift Height (Pad Only):

    73" - 75" / 1,854 - 1,905 mm.

    M - Max Lift Height (3" Adapter):

    75.5" - 77.5" / 1,917 mm. - 1,968 mm.

    N - Drive-Thru Clearance: (NARROW)

    94" / 2388 mm.

    N - Drive-Thru Clearance: (WIDE)

    102" / 2591 mm.

    Screw Pad Adjustment:

    2" / 51 mm.

    Motor (**)

    220 VAC / 60 Hz. 1Ph.

    Time of full Rise:

    45 Seconds

    Max Load Per Arm:

    2,500 Lbs. / 1134 Kg.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. 

    Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.

    Recently viewed

    You may also like