Aims Power Hybrid Inverter Charger 9.6 kW Power Output 15 kW Solar Input - PIHY9600

Save 10%

Sale price$2,916.99 Regular price$3,240.99


At Aims Power, We’re Passionate About Designing And Developing Off-grid And Renewable Energy Solutions.

    The NEW REVOLUTIONARY AIMS Power Hybrid Inverter gives you total control of your power. It combines solar power and battery backup into one complete, easy to use solution, that provides FREE power and independence from the grid. In addition, the AIMS Power Hybrid Inverter can reduce or eliminate electric bills, provides power during outages, and allows customers to monitor their system from anywhere.

    With the easy to use digital touch screen display, the hybrid inverter can be set up using the following simple modes for your convenience:
    •    Self-Use – The panels will power the electrical loads first, for FREE and any excess energy is then used to recharge a battery bank. The remaining energy will go back to the grid.
    •    Selling First – The panels will power the loads first and any excess energy will go back to the grid.
    •    Charge First – The panels will charge the battery bank first and any excess energy will then power the electrical loads for FREE. The remaining energy will go back to the grid. This setting will also allow you to use solar and grid to recharge the batteries if the solar panels can’t produce enough power to charge the batteries.

    See Features Below:

    • Listed to UL 1741-SA I CSA 22.2 No.107-01 I UL1998 I UL1699B

    •     Stackable (Max 6)

    •     Direct 3 string PV input

    •     IP65 NEMA4X rated for outdoor installation

    •     10 year warranty

    •     Customizable DC input voltage for various battery types including lithium and lead

    •     Free USA based tech support

    •     Wide programmable voltage input range

    •     Generator input for backup 240VAC

    •     Wide PV input voltage range

    •     Load sharing

    •     Isolated emergency backup output for defined loads

    •     Configurable charge and load times based on local utility recommendations

    •     Loaded with safety features

    •     Large 5-inch color LCD

    •     RS485, CAN, Wi-Fi, 4G

    •     Extremely efficient

    •     FCC Part 15 Class B

    PV INPUT PIHY9600 9600 WATT (9.6kW)
    Max Input Power (kW) 15
    Max PV Voltage (V) 660
    MPPT Range (V) 80-550
    Nominal Voltage 360
    Startup Voltage 100
    Max Input Current (A) 15.5 x 3
    Max Short Current (A) 26 x 3
    Max Charge/Discharge Power (kW) 11.5 | 10.3
    Max Charge/Discharge Current(A) 50
    Battery Common Voltage (V) 230
    Battery Voltage Range(V) 80- 495
    Battery Type Lithium | Lead
    Max Continuous Power(kVA) 9.6
    Max Continuous Current(A) 40 | 46.5
    Nominal Grid Voltage (V) 211 to 264 @ 240 | 183 to 229 @ 208 (not 3 phase, split phase)
    Nominal Grid Frequency (Hz) 60
    Output Power Factor .99 adjustable
    Current THD(%) <3
    Max Continuous Power(kVA) 9.6
    Max Continuous Current(A) 41 | 46.5
    Max Peak Currenty (A)(10 min) 47.9 | 49.5
    Max Peak Power(kVA)(10 min) 11.5 | 10.3
    Nominal AC Voltage L-L(V) 240 | 208 (not 3 phase)
    Nominal AC Voltage L-N(V) 120 | 120
    Nominal AC Frequency(Hz) 60
    Switching Time(ms) <10
    Voltage THD(%) <3
    CED Efficiency(%) 97
    Max Efficiency(%) 97.6
    PV to Battery Efficiency(%) 98.1
    Battery between AC Efficiency(%) 96.8
    PV Reverse Polarity Protection YES
    Battery Reverse Polarity Protection YES
    Over Current/Voltage Protection YES
    Anti-Islanding Protection YES
    AC Short Circuit Protection YES
    Residual Current Detection YES
    Ground Fault Monitoring YES
    Insulation Resister Detection YES
    PV Arc Detection YES
    Rapid Shut Down YES
    Enclosure Protect Level IP65 | NEMA4X
    Cooling Thermal Fan
    Relative Humidity 0-100%
    Operating Temerature Range -25 to 60C | -77 to 140F
    Operating Altitude < 4000 m | <13123 ft without derating
    Noise Emission (dB) <40
    Stanby Consumption (W) <10
    Mounting Wall Bracket
    Communication with RSD SUNSPEC
    Display & Communication Interfaces Full Color LED, RS485, CAN, Wi-Fi
    Certification & Approvals UL 1741 SA | CSA 2202 No. 107-01 |UL 1998 | Rules21 | HECO Rule 14 | IP65 | CEC
    EMC FCC Part 15 Class B
    Dimensions: 23 3/4″ x 15 3/4″ x 9 1/4″ 55 lbs

    Order shipment preparation take 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.

    Recently viewed

    You may also like